TP-LINK Archer C20 AC750 – Enable SNMP

0
140



Would you like to learn how to enable SNMP on the TP-LINK ARCHER C20 AC750 wireless router? In this tutorial, we are going to show you how to configure the SNMP agent of a TP-LINK ARCHER C20 AC750 access point.

• TP-LINK ARCHER C20 AC750 – Version 5.0

Equipment list

Here you can find the list of equipment used to create this tutorial.

This link will also show the software list used to create this tutorial.







Archer C20 AC750 – SNMP

Open your browser and enter the IP address of your wireless router.

In our example, the following URL was entered in the Browser:

• http://192.168.0.1

The AC750 web interface should be presented.

On the login screen, enter the management password.

ARCHER C20 LOGIN SCREEN

Access the Advanced tab on the top of the screen.

ARCHER C6 - Advanced menu

Access the SYSTEM TOOLS menu and select the SNMP option.

C20 AC750 - SYSTEM MENU

On the SNMP screen, enter the following configuration.

• SNMP AGENT – Yes.
• SNMP FOR WAN – optional.
• READ-ONLY COMMUNITY – Enter an SNMP community name.
• READ-WRITE COMMUNITY – Optionally, enter an SNMP community name.

Click on the Save button.

C20 AC750 - SNMP CONFIGURATION

To test your SNMP configuration, use the following commands on a computer running Ubuntu Linux.

Copy to Clipboard

Keep in mind that you need to change the SNMP community name and the IP address.

Here is the command output.

Copy to Clipboard

Congratulations, you have finished the SNMP configuration on the AC750 router.




The post TP-LINK Archer C20 AC750 – Enable SNMP appeared first on TechExpert.

Sumber: TechExpert

LEAVE A REPLY

Please enter your comment!
Please enter your name here